🎥 How to Re-Activate Your Magnetic Tack Hammer

🎥 How to Re-Activate Your Magnetic Tack Hammer

If you're working with a magnetic tack hammer, you know how frustrating it can be when the magnetism starts to fade. Fortunately, re-activating your magnetic hammer is a simple process that requires just a few basic tools.

The first step in the process is to gather the necessary tools. In addition to your magnetic tack hammer, you'll need a strong bar magnet or a similar object that is capable of generating a magnetic field. Once you have these tools at the ready, you can proceed with the re-activation process.

To begin, you'll want to identify the split end of your magnetic tack hammer. This is the end of the hammer that is designed to hold and pick up small tacks. Once you've located the split end, place one end of your long, thin magnet on one side of the split. You'll want to leave the magnet in place for a few minutes to allow it to work its magic.

After a few minutes have passed, you can remove the magnet from the tack hammer and turn it around. Next, place the other end of the magnet on the other side of the split and set it aside for a few more minutes. By placing the magnet on both sides of the split, you'll be able to fully re-activate the magnetic field of your tack hammer.

Once you've completed the process, you can test your tack hammer to ensure that it is functioning properly. Simply pick up a few tacks and make sure that they are sticking to the hammer as they should. If your hammer is still not holding tacks as effectively as it should, you may need to repeat the process a few more times until the magnetism has been fully restored.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.