IVAN #12 Rivets & Burrs
IVAN #12 Rivets & Burrs
- If out of stock, this item will typically ship to you in 7 days
SKU:11280-4101
2 available now
Couldn't load pickup availability
Use 8110-00 Rivets & Burrs Setter.
#12 heavy-weight rivets and burrs in three sizes.
Specifications
Cap: 9.5mm (3/8")
Size: 12mm (1/2") / 20mm (3/4") / 25mm (1")
Option: Solid Copper / Solid Brass
How to install
1. Place the rivet into a pre-punched hole, with the flat portion on the good side of your leather.
2. Position the washer on the rivet.
3. Look at the end of your setter. There is a hole on one side and a flattened dome on the other. Place the hole over your rivet.
4. Use a rawhide mallet (20oz recommended) to hammer down the washer, until it's firm against the leather.
5. Snip off the excess rivet with strong, sharp pliers
6. Place the flattened dome end of the setter over the washer and hammer hard with the mallet until the rivet is set, and the cut end of the rivet is smooth.
The nitty gritties
We try to offer a speedy delivery service for all of our products. When you place an order with us, and the item is in stock, we'll dispatch it within just one working day. If it's out of stock, we'll aim to send it within 7 days. We'll let you know if there are any delays beyond 7 days, as our suppliers sometimes run out of stock too!